What electrical equipment shall i use to make power in our office stable at 220volt AC.? - stable equipment
Please explain briefly what is cheaper.
Sunday, January 24, 2010
Stable Equipment What Electrical Equipment Shall I Use To Make Power In Our Office Stable At 220volt AC.?
Subscribe to:
Post Comments (Atom)
1 comments:
First, determine why you change. Contact an electrician to do so.
a) If the tension is due to the changing electric utility and the problem of energy companies and then contact us.
b) If due to inadequate wire size from the drop-down menu "service" cable from the street into the building due to heavy loads, you should use the service until today.
c) If due to bad wiring or excessive weight of the building, you should replace the wiring or improve.
If (a) is the problem and the utility does not do something, you must first trial. You can use the automatic voltage regulator to the point, adding that enters the building, but it is expensive.
If the problem only in your office and building management refused to improve the service, you can put a voltage regulator to the point where the power enters your office. Or move.
Post a Comment